The Guyson Pencil Blast unit uses a small independent pressure fed system to deliver a high powered blast source through a micro tipped blast nozzle. This makes it perfect for cleaning intricate and difficult to reach areas. The pencil shaped nozzle, with internal diameters as fine as 0.8mm, pressure blasts ultra fine media of a particle size of less than 300 microns. The Pencil Blast unit can be fitted as an option to Guyson’s standard Formula and Euroblast® systems, or it can be used as a freestanding unit.
Guyson RXS200
For higher volumes of dental implant production Guyson offers the Multiblast® RXS200 as a first step on the automation ladder. Rotating components in front of fixed or moving blast guns and nozzles produces a quality of surface finish coupled with high productivity, which cannot be achieved in manual blast systems. Designed and engineered from the outset to ensure a high level of process and machine control, the RXS200 ensures an accurate, consistent and uniform finish to every component. Whilst component quality, cost control and productivity can be dramatically increased by eliminating the variations inherent in hand processing.
The Guyson RXS200 delivers consistent, effective finishing results adding quality assured value to your components.
The Guyson Multiblast® RXS200 comes in several permutations, allowing for varied production scenarios. The machine can be used as a one-time-use media system, throwing the used media away once used. It is also available with several options of media sieve to maintain a highly consistent media profile - ensuring critical surface texture is maintained.
- Two spindles, one in load position and one in blast position.
- Two blast nozzles arranged to co-blast the rotating dental screw thread
- Media delivery system to suit customer applications (Suction/ Pressure feed)
- Suitable for manual loading volumes 200 to 500 per day - cycle time typically
- 10 seconds
- Accurate enough for robot loading and capable of 2000 pieces per day
- Fully medical specification compliant - fully 316L stainless steel
- HMI / PLC controls
- Data recording capability
- Media classification options to give a statistical capable surface texture (Cpk >1.33)
Guyson's range of 'Kerry' branded ultrasonic baths provide safe, fast and effective ultrasonic cleaning in a fraction of the time required by hand cleaning and is high effective at cleaning dental implants either in the dental technicians workshop or at the manufacturing level prior to sterilisation.
The smaller KC ultrasonic baths, with an approximate capacity of 2 or 3 litres, are easy to use, with a single on/off switch for the ultrasonics. Operating instructions are printed on the bath’s front panel.
The larger microprocessor controlled MKC ultrasonic baths are available in capacities of 6, 14 and 22 litres (approx), allow the user to pre-set exact cleaning times (up to 99.9 mins) and temperatures (from 20 to 80°C), thus ensuring the same high level of cleanliness every time. All the KC & MKC tanks are made from stainless steel.
Please contact us for South East Asia Market, Malaysia, Vietnam, Indonesia, Thailand, Philippines, Singapore, Brunei, Laos, Myanmar and Australia for more information.
